Thursday, 20.02.2020     

Journal Information

Journal of Applied Science and Engineering Innovation
ISSN 2331-9062 (Print)
ISSN 2331-9070 (Online)

Journal of Applied Science and Engineering Innovation is an academic journal organized by the American Computational Science Society, which mainly publish the participants' papers in the annual International Conference on Applied Science, Engineering and Technology (ICASET) published a year. It usually do not accept the submission of non participants.


Current Issue

2020 Vol.7 No.1


Energy Auditing and Waste Heat Recovery for Dry Type Cement Kiln System in Ethiopia: A Case Study
Author: Beniam Getasetegn Emyat
Author affiliation:
Department of Mechanical Engineering, School of Mechanical and Industrial Engineering, Institute of Technology, University of Gondar, P.O. Box: 196, Gondar, Ethiopia

Abstract: The aim of this study is energy audit and heat recovery of a dry type technology of cement industry in Ethiopia. The kiln has a capacity to produce 2000 ton-clinker per day. By considering 12 months data for mass and energy balance, auditing energy is performed. From the result about 35% of the total input energy was being lost through hot flue gas (19.53%) and cooler stack (16.22%). By using waste heat recovery steam generator (WHRSG) about 5 MW (6.13%) of the total input energy could be recovered. The whole electrical energy usage of the kiln system safely used from the generated power. So, the factory could keep 800,000 USD/Year by using the generated power for production of clinker.

Keywords: Cement plant; Kiln system; Energy audit; Waste heat recovery

Download PDF

How to Cite this Article:

Beniam Getasetegn Emyat. Energy Auditing and Waste Heat Recovery for Dry Type Cement Kiln System in Ethiopia: A Case Study, Journal of Applied Science and Engineering Innovation, 2020, 7(1), 1-7.


The Synthesis and Characterizations of Water-soluble Two-photon Polymerization Photoinitiator and Its Applications for 3D Hydrogel Microfabrication
Author: Lili Huang1,2, Zhong Xiong1,2, Xianzhi Zeng3, Zhimin Zhao1, Yaoyu Cao3, Yanzhi Xia2
Author affiliation:
1 College of Chemistry and Chemical Engineering, Qingdao University, Qingdao 266071, China
2 State Key Laboratory of Bio-fibers and Eco-textiles, Institute of Marine Biobased Material, Collaborative Innovation Center of Shandong Marine Biobased Fibers and Ecological textiles, Qingdao University, Qingdao 266071, China
3 Guangdong Provincial Key Laboratory of Optical Fiber Sensing and Communications, Institute of Photonics Technology, Jinan University, Guangzhou 510632, China

Abstract: Two-photon polymerization (TPP) microfabrication (TPPM) has demonstrated the capability of fabricating ultra-precise three-dimensional (3D) microstructures, yet TPP technique has limited applications in 3D-hydrogel microfabrication due to the lack of high-efficiency photoinitiator with good water solubility. In this study, a water-soluble photoinitiator WSPI is prepared via host-guest interaction between 2,6-dimethyl-β-cyclodextrins (2,6-DM-β-CDs) and 2-benzyl-2-(dimethylamino)-4′- morpholinobutyrophenone (PI369). Threshold laser power for TPPM of the "WSPI" pregel solution is measured to 1.9 mW through line microfabrication, which is one-tenth of that reported previously. Furthermore, 3D-hydrogel microstructures are also successfully fabricated with gratifying resolutions, highlighting its potential for high-precision 3D microfabrication.

Keywords: Water soluble photoinitiator, Two-photon polymerization, 3D hydrogels, Threshold power

Download PDF

How to Cite this Article:

Lili Huang, Zhong Xiong, Xianzhi Zeng, Zhimin Zhao, Yaoyu Cao, Yanzhi Xia. The Synthesis and Characterizations of Water-soluble Two-photon Polymerization Photoinitiator and Its Applications for 3D Hydrogel Microfabrication, Journal of Applied Science and Engineering Innovation, 2020, 7(1), 8-12.


Research on Carbon Emissions of Green Buildings Based on LCA
Author: Baosheng Zhang, Peng Wang, Xiaoqian Qi
Author affiliation:
Department of Economic Management, North China Electric Power University, Baoding, China.

Abstract: In recent years, with the rapid development of China, carbon emissions have also increased year by year. China once proposed at the Paris Climate Conference that by 2030, the carbon dioxide emissions per unit of GDP will fall by 60%-65% compared with 2005, and peak as early as 2030, so China faces enormous pressure on carbon emission reduction. According to statistics, the carbon emissions of the construction industry are 40% of China's total carbon emissions. Therefore, the development of green buildings as a solution to reduce carbon emissions in the construction industry has received increasing attention in China. This paper attempts to use a full life cycle assessment (LCA) method to compare and analyze the carbon emissions of green and non-green buildings, and selected 21 construction projects in China, including 12 green buildings and 9 non-green buildings for research. This paper also divides the whole life cycle of the building into five stages, which are the production and processing of building materials, the transportation of components, the on-site assembly construction, the construction operation and the stage of building demolition, and then calculate the carbon emissions of each stage separately. In the first, second, third and fifth stages, the impact of the prefabricated buildings on the carbon emissions of green buildings is taken into account, which makes the research more accurate. The results show that the carbon emissions of green buildings are lower than the carbon emissions of non-green buildings, and in the five phases of the whole life cycle of the building, the carbon emissions in the construction operation stage account for the highest proportion, reaching about 80%. In addition, the higher the assembly rate of the building, the lower the carbon emissions of the entire life cycle. And for residential and public buildings, the impact of different building structures on their carbon emissions is different.

Keywords: Whole life cycle assessment method, Green building, Prefabricated building, Carbon emissions

Download PDF

How to Cite this Article:

Baosheng Zhang, Peng Wang, Xiaoqian Qi. Research on Carbon Emissions of Green Buildings Based on LCA, Journal of Applied Science and Engineering Innovation, 2020, 7(1), 13-24.


Decomposition of Influencing Factors of Carbon Dioxide Emission in Qinghai Transportation Industry
Author: Peng Wang, Hongkai Zhao, Zheng Li
Author affiliation:
Department of Economic Management, North China Electric Power University, Baoding, China.

Abstract: Based on the methods of IPCC, this paper used the "top-down" method to calculate the total CO2 emission of energy consumption in Qinghai province from 2005 to 2016. On this basis, the LMDI model will transport carbon dioxide emissions of Qinghai province factorization for transportation economies of scale, transportation, industry, transportation, energy efficiency growth industry economic efficiency, transportation structure effect, population scale effect, the structure of the transportation industry energy consumption effect these six factors, for each influence factors on the transportation industry in Qinghai province and the role of carbon dioxide emissions and contribution value are analyzed. The results show that during the study period, the total amount of carbon dioxide emissions from energy consumption increased, but the growth rate decreased. Among the incremental factors of carbon dioxide emissions of Qinghai transportation industry, population size, transportation scale and energy consumption structure of transportation industry promote carbon dioxide emissions of Qinghai transportation industry, while transportation structure inhibits carbon dioxide emissions of Qinghai transportation industry.

Keywords: Qinghai province; transportation industry; carbon dioxide emissions; influencing factors decomposition.

Download PDF

How to Cite this Article:

Peng Wang, Hongkai Zhao, Zheng Li. Decomposition of Influencing Factors of Carbon Dioxide Emission in Qinghai Transportation Industry, Journal of Applied Science and Engineering Innovation, 2020, 7(1), 25-38.


Analysis of Factors Influencing Labor Cost Changes of Transmission Lines Based on ISM Model
Author: Li Jinchao1,2, Wang Li1
Author affiliation:
1 School of Economics and Management, North China Electric Power University, Beijing, China
2 Beijing Key Laboratory of New Energy and Low-Carbon Development, North China Electric Power University, Beijing, China

Abstract: In the process of transmission line construction, project cost control is the key to ensure the project economy. In recent years, labor cost overruns have intensified, which has severely affected the cost of transmission line projects. As an important part of engineering cost, effective control of labor cost is crucial to lean management of engineering cost. In order to solve a series of problems caused by labor cost changes in transmission line engineering, this paper starts from looking for the influencing factors of labor cost changes, establishes a model, and accurately finds out the key influencing factors of labor cost changes. This research can provide a reference for the management and control of transmission line labor costs, and provide a path to realize the economic benefit of transmission line engineering.

Keywords: Engineering cost, Lean management, Labor cost changes, Key influencing factors

Download PDF

How to Cite this Article:

Li Jinchao, Wang Li. Analysis of Factors Influencing Labor Cost Changes of Transmission Lines Based on ISM Model, Journal of Applied Science and Engineering Innovation, 2020, 7(1), 39-43.


Preparation of Carrageenan Aerogel from Extraction of Chondrus and Application in Oil/Organic Solvents Absorption
Author: XiaoYubin, Fu Maodong, Wu Dawei, Xue Zhixin*, Xia Yanzhi
Author affiliation:
College of Chemistry and Chemical Engineering, State Key Laboratory of Bio-fibers and Eco-textiles, Institute of Marine Biobased Materials, Collaborative Innovation Center of Shandong Marine, Biobased Fibers and Ecological textiles, Qingdao, Shandong,266071, China

Abstract: Carrageenan aerogel was prepared by freeze-dried technology from extraction of Chondrus with potassium chloride as cross-linking agent and it was used to absorb water, oils and organic solvents. The chemical structure and microstructure of the carrageenan and carrageenan aerogels were characterized by FTIR and SEM, It was found that the concentration of carrageenan solution had a significant effect on the microstructure and adsorption properties of aerogels. When the concentration of carrageenan increased from 1 wt% to 4 wt%, the pore size of aerogels increased obviously. When the carrageenan concentration increased from 1 wt% to 4 wt%, the maximum water absorption ratio of the aerogel decreased from 21.5 g/g to 11.5 g/g. At the carrageenan concentration of 2.5%, the oil absorption capacity was 20-25 times of its own weight, and the adsorption amount of the organic solvent also exceeded 14 g/g. As for soybean oil and DMF, the adsorption amount was maintained at 14-17 g between the second and tenth times, which showed that the carrageenan aerogels had a good adsorption stability and excellent cycle performance.

Keywords: Extraction, Carrageenan aerogel, Adsorption, Repetitive absorption rate

Download PDF

How to Cite this Article:

XiaoYubin, Fu Maodong, Wu Dawei, Xue Zhixin, Xia Yanzhi. Preparation of Carrageenan Aerogel from Extraction of Chondrus and Application in Oil/Organic Solvents Absorption, Journal of Applied Science and Engineering Innovation, 2020, 7(1), 44-48.


Intelligent Computing and Algorithm Analysis for a Class of Fuzzy Comprehensive Decision Optimization Model
Author: Xiao Xiaonana
Author affiliation:
Tan Kah Kee College, Xiamen University, Zhangzhou 363105 , China

Abstract: In recent years, big data analysis has become one of the most challenging frontier emerging technologies in current and future research. The combination of big data and intelligent computing is the solution to the big data service and application problems in many fields nowadays. Applying the majorized method of fuzzy transformation and fuzzy integral, this paper discusses theoretically and pragmatically about how to make Fuzzy optimal multidimensional synthetical decision and analyzes its reliability, provides the optimal mathematical model of Fuzzy optimal multidimensional synthetical decision, promotes the expertise of synthetical decision and widens its application in fields of natural science and social science.

Keywords: Intelligent Computing, Majorized model, Fuzzy transformation, Fuzzy integral, Possibility measure, Reliability analysis

Download PDF

How to Cite this Article:

Xiao Xiaonana, Intelligent Computing and Algorithm Analysis for a Class of Fuzzy Comprehensive Decision Optimization Model, Journal of Applied Science and Engineering Innovation, 2020, 7(1), 49-51.


Research and Exploration on File Standardization of Archival Information System
Author: Huidong Duan
Author affiliation:
Qingdao University, Qingdao, Shandong 266071, China

Abstract: The arrival of the information age has brought new opportunities to archives management. But with the maturity of file information management system, the information processing capacity is increasing. If we want to raise the file management of enterprises to another level, we must innovate the management and service mode, and also need to improve the corresponding management system. Archives knowledge management is a brand-new management mode under the guidance of this new idea and concept, which makes comprehensive decisions on all intellectual capital including information and implements comprehensive management. Its greatest feature is to combine information technology with humanistic thinking, and pay more attention to the latter. In addition to establishing a complete management system to manage enterprise files, file management also needs to use current advanced scientific and technological means as support conditions to further improve enterprise file management. These complete archival information materials are then serviced through a comprehensive and innovative approach.

Keywords: Management Standardization, Enterprise Archives, Information System

Download PDF

How to Cite this Article:

Huidong Duan, Research and Exploration on File Standardization of Archival Information System, Journal of Applied Science and Engineering Innovation, 2020, 7(1), 52-55.


 

 
��ҳģ��